convex mirrors

How well do you know convex mirrors?

A curved mirror is a mirror with a curved reflecting surface. The surface may be either convex (bulging outward) or concave (recessed inward). Among them, convex mirrors are the most common in life.

principle of convex mirrors

A convex mirror or diverging mirror is a curved mirror in which the reflective surface bulges towards the light source. Convex mirrors reflect light outwards, therefore they are not used to focus light. Such mirrors always form a virtual image, since the focal point (F) and the center of curvature (2F) are both imaginary points “inside” the mirror, that cannot be reached. As a result, images formed by these mirrors cannot be projected on a screen, since the image is inside the mirror

.

The convex mirror manufacturing process is divided into glass molding and mirror plating. In the factory, workers cut the glass into a round shape, then put it in a customized mold, put it into the furnace, and adjust the temperature according to the required arch height. The glass softens at high temperatures and naturally sags to form a curved surface. Because it relies on softening to sag naturally, the error range of the arch height is relatively large. The inspection standard is mainly based on the qualified diameter. After cooling, the qualified products are selected and sent to the plating mirror. The colored convex mirror uses colored glass as the raw material, and the silver convex mirror uses low-iron glass as the raw material.

Uses of convex

/by
glass price

FLAT GLASS: is it becoming a semi-precious commodity?

????

Recently, the Hefei Glass Chamber of Commerce unanimously passed the resolution of the Hefei Glass Chamber of Commerce to submit an investigation application letter to the relevant departments.

/by

How to use tempered glass safely?

Reasons for strengthening glass breakage:

The tempered glass surface is a layer of compressive stress, and the internal tensile stress layer corresponds to the balance state. When the surface flaw extends to the internal tensile stress layer, it will cause cracking.

This type of scar can be divided into several types:
Scratches are caused by hard objects, sparks during welding, flying objects, etc.
Glass damage during handling and storage.
Damage to the glass when it is embedded.
Thermal stress and damage to system stress.
?External force impact.
It is caused by impurities that occasionally exist in the glass.
unknown reason.

Characteristics of tempered glass rupture:

As long as the tempered glass is partially damaged and ruptured, it will lose the balance of stress and cause full fragmentation. Some of the fragments are scattered by granules, and some are still attached together to form a piece of fragmented aggregate. When a rupture occurs, a person in the vicinity may be hit by rain-like particles or may be hit by a large piece of aggregate. If the fragmentation block is large enough, it may hurt the human body.

Reaming or drilling of tempered glass:

After the glass is cut or drilled, the strength of the surrounding structure will be greatly weakened. In the part subjected to external force, such processing should be avoided as much as possible; if it is not, the strengthened laminated glass should be used.

When tempered glass is used in each of the following locations, it is desirable to use reinforced laminated glass:

The top of the patio is said to be used in horizontal or near-horizontal glass, such as skylights and skylights.
The outer wall of the building is used vertically. If it falls, it will hurt the objects on the ground and the glass of the human body.
Armrests or guardrails, such as glass may cause the body or objects to fall when broken.

/by

Figured glass

Figured glass, also known as patterned glass, is a type of decorative glass characterized by unique textures, patterns, or designs embedded onto its surface. This distinctive glass is manufactured using various techniques during the production process, resulting in a variety of visual effects and functional properties.

The primary purpose of figured glass is to offer privacy, while still allowing natural light to pass through. It achieves this by distorting images and blurring visibility, making it an ideal choice for applications that require both aesthetics and privacy, such as interior partitions, shower enclosures, and windows in residential and commercial buildings.

The manufacturing process of figured glass involves rolling the glass while it is still hot, imprinting the desired patterns onto its surface. Some common patterns include floral designs, geometric shapes, or textured motifs, all of which contribute to the unique aesthetic appeal of the glass. Additionally, it can come in various textures, including frosted, ribbed, or fluted, each offering distinct visual and tactile experiences.

Due to its decorative properties and functional benefits, figured glass is widely utilized in both interior and exterior architectural designs. It adds an element of style, privacy, and light diffusion, making it a versatile and popular choice for enhancing the visual appeal and functionality of various spaces.

ultra figured glass
  1. Aesthetic Enhancements: Its intricate patterns and textures add a decorative touch to spaces, providing a unique and visually appealing ambiance. Whether used in doors, windows, or interior partitions, figured glass can significantly enhance the overall aesthetic of a room or building.
  2. Privacy and Light Diffusion: The distorted patterns and textures of figured glass help obscure visibility from the outside while allowing natural light to filter through. This characteristic makes it an ideal choice for areas requiring privacy, such as bathrooms, offices, or conference rooms, without compromising on the entry of daylight.
  3. Safety and Security: Certain varieties of figured glass are designed to enhance safety and security. These types of glass are often more resistant to shattering, making them suitable for use in areas where safety is a concern, such as in public buildings, schools, or commercial establishments.
  4. Sound Insulation: In addition to its visual and privacy-enhancing properties, some types of figured glass also offer sound insulation benefits. These glass variants can help reduce external noise levels, creating a quieter and more comfortable indoor environment.
  5. Versatile Applications: Figured glass is used in a wide range of architectural and interior design applications, including but not limited to partitions, doors, shower enclosures, furniture, and decorative panels. Its versatility and adaptability to various design requirements make it a popular choice for both residential and commercial projects.

If you have any ideas, please feel free to contact us anytime.
+86 0755 86152161 inquiry@hongjiaglass.com

Instagram
/by

Do you know how to properly install a sliding glass door

Do you know how to properly install a sliding glass door？ With the constant innovation and development of glass industry, glass products have been fully integrated into our lives, decorate in household in the frequency of using glass is more and more frequent, and glass door is not only in the construction industry is known as often used in decorating glass products also shows its unique advantages, steel material selection is not confined to the wooden people, more is to choose about glass, glass door made of glittering and translucent get rid of appearance, not only provides the guarantee on the quality, the glass door is divided into a number of different styles, the original glass door is single or double open the door, and with the continuous improvement of people’s life,Demand for products also will increase, so the glass sliding door at this moment a big rise, attracted a lot of users, provides users with more convenient features, present the effect is better, both in terms of material and aesthetic appearance has many advantages, many users for the installation of the glass sliding door there are still some misunderstandings, so let small make up for everybody introduced several methods of sliding door of glass of installation:
Installation method of sliding glass door:

1. Hanging sliding door because the first rail box and then stick brick, exposed rail box and brick junction is not good processing, to the construction of a certain degree of difficulty. Due to the track being under a certain pressure, the brick is also stressed, and for a long time, easy to lead to the track next to the brick cracking. Additionally, if it is in space such as the kitchen toilet, an orbit box place is easy to hide filth and dirt, and lampblack accumulates ash to wait to fall above, bringing trouble to clean sanitation.

2. The upper part of the sliding door track box size to ensure that the height of 12 cm, 9 cm wide. Like the curtain box, the tracking box is installed inside the track, and the sliding door can be suspended on the track. Today most doors or openings are between 1.95 and 2.15 metres in height. Experience shows that when the height of the door is less than 1.95 meters, no matter how tall the person is, they will feel very depressed and uncomfortable. Accordingly, when making a sliding door, the height needs to be at least 195+12=207 centimeters above, have enough space to make a track box just consider making a sliding door. Otherwise can be external hang only, namely orbit box is exposed on the outside, the affirmation is not beautiful, and time a long time, the aperture of the door and metope can become big.

3. The width of the sliding door is exquisite. The normal gold size of the door is about 80 cm x 200 cm, in this structure, the door is relatively stable. If have a height of more than 200 centimeters, do sliding door below even higher circumstance, had better keep in the area below invariable premise, the width of the door shrinks narrow or make a few sliding doors more, maintain the stability of the door and use security.

4. Careful use from the ground to the top of the sliding door (hanging rail box). As a result of push when the swing amplitude is too big, the time is long sliding door is easy to be out of shape, of the back door cannot open, which also means cannot be repaired and cannot be used.

5. Because the sliding door and wall or cabinet body on both sides of the contact, therefore, in the contact position do not have other objects to block the closure of the sliding door. For example, the position of the drawer inside the cabinet should avoid the intersection of sliding doors, and should be higher than the bottom by at least 1cm; The drawer inside the folding door cabinet body should be apart from the side wall by at least 15cm here special notice the power switch on the wall and socket even, if blocked the close of sliding door, should change the position of switch and socket.

6. No matter if you do any material on the ground, to ensure that the level, the four walls of the door should be kept horizontal and vertical. Otherwise, the door will skew after installation. The adjustable error is no more than 10mm.

7. In the installation position please do not install the corner line, the gypsum line can be installed in the upper wall cabinet on the sealing board, if the door is directly to the top do not install the gypsum line.

If you have any ideas, please feel free to contact us anytime.
+86 0755 86152161 inquiry@hongjiaglass.com

/by

How is the decorative effect of glass spell mirror

How is the decorative effect of glass spell mirror

The decorative effect of glass spell mirrors can be quite stunning and unique. Spell mirrors, also known as split mirrors or fragmented mirrors, are created by assembling small pieces of glass together to form intricate patterns or designs. Here are some of the decorative effects and characteristics of glass spell mirrors:

  1. Distinctive Patterns: Glass spell mirrors often feature elaborate and eye-catching patterns formed by arranging small glass pieces in various configurations. These patterns can range from geometric shapes to more intricate and abstract designs, adding a touch of visual interest and complexity to the overall decorative effect.
  2. Reflective Surface: Like traditional mirrors, glass spell mirrors possess a reflective surface that can effectively enhance the perception of space and light within a room. The fragmented nature of the mirror adds a dynamic quality to the reflections, creating a captivating and visually engaging ambiance.
  3. Unique Aesthetic Appeal: The fragmented and patterned design of glass spell mirrors imparts a unique and artistic aesthetic to the overall decor. These mirrors can serve as striking focal points in interior spaces, adding a touch of sophistication and elegance to the surroundings.
  4. Enhanced Texture and Depth: The diverse textures and depths created by the fragmented glass pieces contribute to a multidimensional visual effect. This can result in an intriguing interplay of light and shadows, creating depth and complexity in the mirror’s appearance.
  5. Versatile Application: Glass spell mirrors can be incorporated into various interior design styles, ranging from contemporary and modern to more traditional or eclectic themes. They can be used as decorative wall accents, statement pieces, or functional mirrors in different areas of a room, providing a touch of artistry and sophistication to the space.

Overall, glass spell mirrors offer a distinctive decorative effect that combines the functionality of a mirror with the artistic appeal of fragmented glass, making them an attractive choice for those seeking to add a unique and visually appealing element to their interior decor.

What are the advantages of glass spell mirror decoration?

1, The form of expression has a unique personality, through different colors to match the entire decoration style, unique reflective effect and lighting effect, making the whole space extremely brilliant noble;

2, Unique art decorative effect, through different geometric collocation ornament to cater to the entire decoration style, improve the overall decorative style, with the icing on the cake decorative beauty;

3.The installation is convenient and simple, and the requirements of installation and materials are almost negligible, which reduces the construction period and decoration and installation cost;

4. Environmental protection, energy saving, without any harmful effects on human body, consistent with the development direction of social green and environmental protection, improving the quality of life.

/by

The difference between safety glass and toughened glass

What is safety glass? What’s the difference with toughened glass?

Presumably many people know toughened glass, as a result of the formation of small pieces after breaking, reduced the risk of cutting, toughened glass is applied in a number of fields, and there is another noun, called “safety glass”, this safety glass and toughened glass and what is the difference?In fact, safety glass is a class of glass collectively, the requirements of violent vibration or impact not broken, even broken is not easy to hurt people, and tempered glass is one of them.Under the classification of safety glass, there are many kinds of glass!

? Toughened glass,

/by
glass-shower-room1

Glass shower room and daily use maintenance point

The advantage of the glass shower room and daily use maintenance point

Glass shower rooms offer several advantages and can significantly enhance the overall look and functionality of a bathroom. Here are some key advantages of using a glass shower room:

  1. Aesthetic Appeal: Glass shower rooms can make a bathroom appear more spacious and elegant, creating a sleek and modern look that can elevate the overall aesthetic of the space.
  2. Light and Openness: They allow natural light to pass through, making the shower area feel brighter and more open compared to traditional enclosed showers, which can contribute to a more inviting and refreshing atmosphere.
  3. Easy Maintenance: Glass surfaces are relatively easy to clean and maintain. Stains and soap scum are usually easy to wipe off, and many glass surfaces are treated to resist water spots and mineral buildup.
  4. Versatility: Glass shower rooms can be customized to fit different bathroom sizes and layouts. They can be installed in various configurations, including corner, alcove, and walk-in designs, offering flexibility in design and functionality.
  5. Durability: High-quality tempered glass used in shower rooms is sturdy and durable, providing a long-lasting solution for your bathroom. Tempered glass is also more resistant to breakage compared to regular glass.

When it comes to daily use maintenance, here are some points to consider:

  1. Regular Cleaning: Wiping down the glass panels with a squeegee or a soft cloth after each use can help prevent the buildup of water stains and soap scum. Regular cleaning prevents the need for more intensive cleaning sessions later.
  2. Use Mild Cleaners: Use mild, non-abrasive cleaners to avoid damaging the glass surface. Avoid using harsh chemicals or abrasive materials that can scratch or etch the glass.
  3. Prevent Water Buildup: Keep the shower area well-ventilated to prevent excessive moisture buildup, which can lead to mold and mildew growth. Proper ventilation can also help in reducing the formation of water stains.
  4. Sealant Maintenance: Check and maintain the seals and hinges regularly to ensure that the glass panels remain securely in place and to prevent water leakage.
  5. Tackle Hard Water Deposits: If you have hard water in your area, consider using water softeners or specialized cleaning products to prevent mineral deposits from building up on the glass surface.

By following these maintenance tips, you can ensure that your glass shower room remains clean, clear, and free of unsightly stains, making your bathroom a pleasant and inviting space for daily use.

Glass shower room
Glass maintenance
Instagram
/by

During the outbreak, strict management, continuous production of glass factory

During the outbreak, strict management, continuous production of glass factory

Facing the severe and complicated situation of the prevention and control of the new coronavirus epidemic, the company fully implemented the working principles of “prevention, prevention of production, and development”. The majority of employees shouldered their responsibilities, set an example, and worked together to ensure their safety and health Under the premise of ensuring the company’s safe and orderly production during the epidemic prevention and control period; by appropriately reducing the pull amount, seize this rare opportunity, continue to innovate the process technology, and improve the quality steadily; by maintaining close contact with downstream customers, grab Sales orders, consolidating and expanding new and old users, ensuring the safe operation of the capital chain.

1.Non-stop

/by

Is Black Glass suitable for decoration

Is Black Glass suitable for decoration?

Black Glass has a strong decorative effect. Mainly used in wall, background wall decoration, and suitable for any place indoor and outdoor decoration.

Black Glass, with high-end, elite atmosphere, for storefronts, modern or minimalist interior more appropriate. Suitable for large area use, with other colors, texture materials will reduce the use of heavy, oppressive, technological sense. Make sure you secure it to the top. If not attached to the wall, it is recommended to use steel over 8 mm.

Features

/by